View 2SA2040_6172.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENN6913
2SA2040/2SC5707
PNP / NPN Epitaxial Planar Silicon Transistors
2SA2040 / 2SC5707
High Current Switching Applications
Applications
*
Package Dimensions
unit : mm 2045B
[2SA2040 / 2SC5707]
6.5 5.0 4
DC-DC converter, relay drivers, lamp drivers, motor drivers, strobes.
Features
* * * * *
Adoption of FBET, MBIT process. Large current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. High allowable power dissipation.
1.5
2.3
0.5
0.85 0.7
5.5
7.0
0.8 1.6
1.2
0.6
7.5
0.5
1
2
3
1 : Base 2 : Collector 3 : Emitter 4 : Collector
2.3
2.3
SANYO : TP
Package Dimensions
unit : mm 2044B
[2SA2040 / 2SC5707]
6.5 5.0 4 2.3
1.5
0.5
5.5
7.0
0.85
0.5
1 0.6
0.8
2
3
2.5
1.2
1.2 0 to 0.2
1 : Base 2 : Collector 3 : Emitter 4 : Collector SANYO : TP-FA
2.3
2.3
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
30101 TS IM TA-3233 No.6913-1/5
2SA2040/2SC5707 Specifications
Note*( ) : 2SA2040 Absolute Maximum Ratings at Ta=25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC Tj Tstg Tc=25C Conditions Ratings (-50)80 (-50)80 (--)50 (--)6 (--)8 (-)11 (--)2 1.0 15 150 -55 to +150 Unit V V V V A A A W W C C
Electrical Characteristics at Ta=25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time Symbol ICBO IEBO hFE fT Cob VCE(sat) VBE(sat) V(BR)CBO V(BR)CES V(BR)CEO V(BR)EBO ton tstg tf Conditions VCB=(--)40V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(-)500mA VCE=(--)10V, IC=(--)500mA VCB=(--)10V, f=1MHz IC=(--)3.5A, IB=(-)175mA IC=(--)2A, IB=(-)40mA IC=(--)2A, IB=(--)40mA IC=(--)10A, IE=0 IC=(--)100A, RBE= IC=(--)1mA, RBE= IE=(-)10A, IC=0 See specified test circuit. See specified test circuit. See specified test circuit. (-50)80 80 (-)50 (--)6 (40)30 (225)420 25 200 (290)330 (50)28 (--230)160 (--390)240 (--240)110 (--400)170 (--)0.83 (--)1.2 Ratings min typ max (--)0.1 (--)0.1 560 MHz pF mV mV V V V V V ns ns ns Unit A A
Swicthing Time Test Circuit
PW=20s D.C.1% INPUT VR 50 RB + 100F + 470F IB1 IB2 OUTPUT RL
VBE= --5V VCC=25V 20IB1= --20IB2= IC=2.5A For PNP, the polarity is reversed.
No.6913-2/5
2SA2040/2SC5707
--7
IC -- VCE
2SA2040 --90mA --80mA --70mA --60mA
7
IC -- VCE
90mA
80mA
--6
6
Collector Current, IC -- A
Collector Current, IC -- A
--5
--4
0 --1
0
mA
A --50m 40mA ---30mA
5
70mA 60mA 50mA 40mA 30mA
20mA
10mA
4
--20mA
--3
3
--2
--10mA
2
--1 0 0 --0.4 --0.8 --1.2 --1.6
1
IB=0
--2.0 IT00206
100
mA
0 0
2SC5707
0.4 0.8 1.2 1.6
IB=0
2.0 IT00207
Collector-to-Emitter Voltage, VCE -- V
--8 --7
IC -- VBE
Collector-to-Emitter Voltage, VCE -- V
8 7
IC -- VBE
2SA2040 VCE= --2V Collector Current, IC -- A
2SC5707 VCE=2V
Collector Current, IC -- A
--6 --5 --4 --3
6 5 4 3 2 1 0
--2 --1 0 0
--0.2
--0.4
--0.6
Ta= 75 25C C --25 C
--0.8
--1.0
--1.2
--1.4
0
0.2
0.4
0.6
Ta=7 5C 25C --25 C
0.8 1.0
1.2
1.4 IT00209
Base-to-Emitter Voltage, VBE -- V
1000 7 5
IT00208 1000
hFE -- IC
Base-to-Emitter Voltage, VBE -- V
hFE -- IC
2SA2040 VCE= --2V DC Current Gain, hFE
7 5 3 2
Ta=75C 25C --25C
2SC5707 VCE=2V
DC Current Gain, hFE
3 2
Ta=75C 25C --25C
100 7 5 3 2
100 7 5 3 2
10 --0.01
2
3
5 7 --0.1
2
3
5 7 --1.0
2
3
Collector Current, IC -- A
--1000 7 5 3 2 --100 7 5 3 2 --10 7 5 3 2 --1.0 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3
5 7 --10 IT00210
10 0.01
2
3
5 7 0.1
2
3
5 7 1.0
2
3
VCE(sat) -- IC
Collector Current, IC -- A
1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3
5 7 10 IT00211
VCE(sat) -- IC
Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV
5C Ta=7 C --25
Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV
2SA2040 IC / IB=20
2SC5707 IC / IB=20
2
5C
7 Ta=
--25 C
5C
25
C
Collector Current, IC -- A
5 7 --10 IT00212
Collector Current, IC -- A
5 7 10 IT00214
No.6913-3/5
2SA2040/2SC5707
Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV
--10000 7 5 3 2
VCE(sat) -- IC
2SA2040 IC / IB=50
10000 7 5 3 2 1000 7 5 3 2 100 7 5 3 2 10 0.01 2 3
VCE(sat) -- IC
2SC5707 IC / IB=50
--1000 7 5 3 2 --100 7 5 3 2 --10 --0.01 2 3
7 Ta=
--25C
5 7 --0.1 2
5C
25C
5 Ta=7
C
25C
C --25
5 7 0.1 2 3 5 7 1.0
3
5 7 --1.0
2
3
Collector Current, IC -- A
--10000
5 7 --10 IT00213
2
3
VBE(sat) -- IC
Collector Current, IC -- A
10000
5 7 10 IT00215
VBE(sat) -- IC
Base-to-Emitter Saturation Voltage, VBE(sat) -- mV
Base-to-Emitter Saturation Voltage, VBE(sat) -- mV
7 5 3 2
2SA2040 IC / IB=50
7 5 3 2
2SC5707 IC / IB=50
--1000 7 5 3 2
Ta= --25C 75C 25C
1000 7 5 3 2
Ta= --25C 75C 25C
--100 --0.01
2
3
5 7 --0.1
2
3
5 7 --1.0
2
3
Collector Current, IC -- A
5 3
5 7 --10 IT00216
100 0.01
2
3
5 7 0.1
2
3
5 7 1.0
2
3
Cob -- VCB
Collector Current, IC -- A
5
5 7 10 IT00217
Cob -- VCB
2SC5707 f=1MHz
2SA2040 f=1MHz
Output Capacitance, Cob -- pF
3 2 100 7 5 3 2 10 7 5 3 2
Output Capacitance, Cob -- pF
2 100 7 5 3 2 10 7 5 3 2 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5
5 7 0.1
2
3
5 7 1.0
2
3
5 7 10
2
3
5
Collector-to-Base Voltage, VCB -- V
1000 7
IT00218 1000
f T -- IC
Collector-to-Base Voltage, VCB -- V
IT00219
f T -- IC
Gain-Bandwidth Product, f T -- MHz
5 3 2
Gain-Bandwidth Product, f T -- MHz
2SA2040 VCE= --10V
7 5 3 2
2SC5707 VCE=10V
100 7 5 3 2
100 7 5 3 2
10 5 7--0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3
10
Collector Current, IC -- A
5 7 --10 IT00220
5 7 0.01
2
3
5 7 0.1
2
3
5 7 1.0
2
3
Collector Current, IC -- A
5 7 10 IT00221
No.6913-4/5
2SA2040/2SC5707
2 10 7 5
ASO
ICP=11A 100ms 10ms 50 1m 0s IC=8A DC s Op era DC tio Op n( era Tc tio =2 n( 5 Ta C) =2 5 C)
10
1.2
PC -- Ta
2SA2040 / 2SC5707
3 2 1.0 7 5 3 2 0.1 7 5 3 2
Collector Dissipation, PC -- W
1.0
s 0
Collector Current, IC -- A
0.8
0.6
No
he
at
sin
k
0.4
0.01 0.1
2SA2040 / 2SC5707 Tc=25C Single Puls For PNP, the minus sign(--)is omitted
2 3 5 7 1.0 2 3 5 7 10 2 3
0.2
0 5 7 100 IT02971 0 20 40 60 80 100 120 140 160
Collector-to-Emitter Voltage, VCE -- V
18 16 15 14 12 10 8 6 4 2 0 0 20 40 60 80 100 120
Ambient Temperature, Ta -- C
IT02972
PC -- Tc
2SA2040 / 2SC5707
Collector Dissipation, PC -- W
140
160
Case Temperature, Tc -- C
IT02973
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2001. Specifications and information herein are subject to change without notice.
PS No.6913-5/5

▲Up To Search▲

Price & Availability of 2SA2040

	To Download 2SA2040 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .